The rattling of bike chains should be the most annoying sound for bikers. Such a sound is mainly caused by the chain bouncing up and down and touching the chain box. The chain box is the chassis that connects the rear wheel and the pedal shaft.
There are many causes of this click, but it depends on the chain’s sagging in general. There are several ways to reduce or eliminate noise, but one of the most common ways is to remove the chain. This article will give you some tips about how to remove chain links. Let’s go through it now!
Most Viewed Posts:
- Top 14 Best Mountain Bikes Under 500 Reviews In 2021
- Top 12 Best Hybrid Bikes Under $500 Reviews In 2021
- Top 19 Best Cruiser Bikes Reviews In 2021
- Top 12 Best Comfort Bikes Reviews In 2021: May Update!
Why Do I Have To Remove Chain Links?
A bike chain is one of the most significant parts of a bike. It helps transfer power from the pedals to the drive wheel. If your bike does not have a bike chain, it cannot move.
When the bike chain is sagging, or when one of the chain links breaks down, it will directly affect the freewheel and harm your bike. Moreover, it may create rattling that will annoy you a lot when riding. Thus, bike chain removal is a great idea.
In short, taking a link removal when your bicycle chain is sagging will help your bike ride better, save its longevity, and save your money and time.
Bike Chain Removal Tools
There are different types of bike chain removal tools for various chain links. But the most common ones include master link pliers, a chain tool, and a chain lube.
Master link pliers
This tool has two other names: power link and quick link. You can use master link pliers to remove the chain-link without driving out the rivets. The most common master link plier is the MLP-1.2. It helps you remove and replace the master links quickly and effortlessly.
A master link plier is relatively easy to use. You need to insert the jaws onto the master link. If you want to open the link, you squeeze the handles. If you’re going to close it, you pull the handles.
You can learn how to use the master link pliers here:
Two common types of chain tools are CT-3.2 and CT-3.3. They have a locating shelf. Such a frame is adjustable, so it works well in any chain link’s widths. You can use it to remove and install the chain rivets. This tool’s good point is that it is effortless to use.
If you want to know more about how to use a chain tool to break a chain, let’s go through this video:
The chain lube is supposed to be the leading tool for bike maintenance. It makes the bike chain’s engagement smoother and maintains a proper shifting performance. Moreover, a good chain lube can also help reduce bike friction.
When removing the bike chain links, you might need some other essential tools such as pairs of latex gloves, revets, and so on.
Removing Bike Chain Links With Tools
The best method for bike chain removal is to use bike chain removal tools. It is not only effortless, but it can also save your time. Below are some steps for your reference.
Step 1: Check the quick-release chain link
This first step is essential. You need to check whether your bike has a quick-release chain link. Turn your pedal in reverse and carefully observe each link.
If your bike has this chain link, then you can move to the next part of this article to learn how to remove the quick-release chain link. If your bike does not have one, the second step will show you how to take a chain removal.
Step 2: Unleash the bike chain
Turn the handle of the chain dismantling tool clockwise to adjust the pin tip so that you can fit one chain into the tool’s outer slot (the slot farthest from the handle). You can put two positions on the chain—an external place for cutting chain and connecting chain and an inner one for loosening chain link.
Step 3: Remove the chain link
First, you need to tightn the handle clockwise. Then keep twisting until you see the chain’s pin end moves to the other side. Remember not to let the pin tip move away from the chain surface. Otherwise, you cannot return it; and you have to cut it shorter or even replace a new one.
Step 4: Connect the chain links
Notice that part of the pin end is still protruding on the inside of the external link. It will help us to reconnect the chain quickly. Twist and push the two ends of the chain together. Until the pin’s end touches the link’s hole connection in the chain again, it is okay.
Then place the chain in the slot outside the chain dismantling tool. The protruding pin end is now opposite the tool pin tip. Turn the handle to push the end of the pushpin back into the chain. Continue tightening until a fully bolted part passes through the other side of the chain. Then check to make sure that both sides of the pin chain should show the same distance on both sides.
Step 5: Loosen the chain link
While the off-road bicycle’s chain-link presses together, the chain link is stiffened. To remedy this, we use the inner slot of the chain dismantler.
You put the chain link in the inner slot, screw the tool pin until it touches the chain’s latch, and tighten only about a quarter of the turn. Doing so loosens the chain links. Then take the tool away and check to see if chain-link reduces. If it is still tight, you should take another quarter of the turn to loosen it.
Let’s check the link for further visible details:
How To Remove Chain Links Without A Chain Breaker Tool?
The best way of bike chain removal is using the chain breaker. However, sometimes you can also remove a bike chain without tools. That is when your bike uses the master link. Here are some steps showing solutions for removing it.
Step 1: Check the chain master link
The first thing to do before chain removal is to check where the master link is. This link has a small clip to connect the chain’s two ends.
Step 2: Get the small clip removed
You do not have to use precisely the shoelace, but I think it is the easiest thing to find as we all wear shoes. You can use whatever you have, like a wire or a weed eater line.
Thread the shoelace through both sides of the master link. Then cross the shoelace and try to pull both ends as hard as possible. It will squeeze the master link and make it unlocked.
Step 3: Cut the extra links
Let’s use a master link plier to cut them. Extra links make your bike chain longer than its correct length. Accordingly, the bike chain is sagging, and the bike cannot work well. Thus, it would be best if you cut them.
Step 4: Connect the chain links
After cutting out the extra links, you need to connect the links. Otherwise, your bike cannot move at all. You have to twist and push the two ends of the chain together. Keep doing that until you see the pin’s end touches the link’s hole connection. Now you have almost done!
Step 5: Check the chain-link again
After connecting the chain links, you should check again to see if it is still loose. If yes, you put the chain link in the inner slot, screw the tool pin until it touches the chain’s latch, and tighten only about a quarter of the turn. Keep doing so till the chain link is in the right length.
To better understand how to remove a chain link without tools, let’s watch this video:
How long should I take off chain links?
It depends on what tools you are using for chain removal. If you use a chain tool like CT-3.2 or CT-3.3, it will be faster and more effortless. Or if you use master link pliers, it will also take a shorter time. But if you use your bare hands or something like a shoelace, it will take a longer time and more challenging to get it done.
How to remove extra links in a bike chain?
The first thing to do is to separate the chain link. You can use a chain tool to make your chain link separated. Then you can use master link pliers to cut the extra ties.
Is removing chain links similar between different types of bikes?
The answer is no. Different types of bikes do not have the same types of chain links. For example, some bikes use the master chain link, but others do not. Therefore, bike chain removal is also not similar between bikes.
How many ways in total can I use for bike chain removal?
There are two main ways for bike chain removal: using bike chain removal tools and using your bare hands or anything you have. Of course, using tools will be much more effortless and more accessible. But in some cases, when there are no tools available, we have to use anything available to remove the links.